1300 771 201

Availability for emergency

1. Home »
2. faqs

Frequently Asked Questions

Other FAQs :

• Q: How often does my sealed surface need re application?
• A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
• Q: If we have a spillage on our newly sealed floor what should we do?
• A: Immediately wipe up spillage with warm soapy water before it dries.
• Q: How do I maintain my sealed marble bench top?
• A: Always use cutting boards on marble bench tops to prevent acid burns from acid based products such as lemons, limes, tomato sauces, coke and champagne.
• Q: How do I clean my sealed floor?
• A: Depending on the sealer used for the surface there are two strategies; a penetrating seal will handle aggressive cleaning such as scouring and strong cleaning products.
  A surface sealer requires a gentler approach ie soft mops, vacuum and non-aggressive cleaning products. Our operator onsite will advise you of the correct cleaning regime for you sealer.
• Q: Can I use Vinegar to clean my sealed stone floors and bench tops?
• A: Vinegar is an acid based product and will burn or etch a polished stone surface.

For More Questions

FAQs » »

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software