1300 771 201

Availability for emergency

1. Home »
2. faqs

Frequently Asked Questions

Other FAQs :

• Q: What surfaces can the clean and capture system sanitise?
• A: The system cleans many hard surfaces including man made tiles/natural stone and many synthetic safety floor.
• Q: How do I arrange for you to come to site?
• A: Either phone or email us and we will arrange an appointment at your convenience. You will be asked questions such as do you have off road parking or an out side tap - neither is essential but the more information we have before visiting makes the demonstration run smoother.
• Q: How often does my sealed surface need re application?
• A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
• Q: How does it achieve such a clean finish?
• A: The combination of emulsification, heat, pressure and vacuum surgically removes the build up of dirt, grease and grime from the micro pores of the different surfaces. First the emulsifier disloves these contaminants and then the heat and pressure combine with the vacuum to remove them.
• Q: If we have a spillage on our newly sealed floor what should we do?
• A: Immediately wipe up spillage with warm soapy water before it dries.

For More Questions

FAQs » »

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software