1300 771 201

Availability for emergency

1. Home »
2. faqs

Frequently Asked Questions

Other FAQs :

• Q: How does it achieve such a clean finish?
• A: The combination of emulsification, heat, pressure and vacuum surgically removes the build up of dirt, grease and grime from the micro pores of the different surfaces. First the emulsifier disloves these contaminants and then the heat and pressure combine with the vacuum to remove them.
• Q: What surfaces can the clean and capture system sanitise?
• A: The system cleans many hard surfaces including man made tiles/natural stone and many synthetic safety floor.
• Q: How often does my sealed surface need re application?
• A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.
• Q: How much does it cost to have my floor cleaned?
• A: The price depends on a number of variables. These include the size of the area, the type of material being cleaned and finally how dirty the floor is. Clean Tile and Grout carry out all their work following a demonstration when a fixed price is given to the customer. The customer then knows what to expect the whole floor to look like once cleaned and the price.
  There are also a number of treatments including sealing, enhancing, and colour sealing of the grout.
• Q: How do I maintain my sealed marble bench top?
• A: Always use cutting boards on marble bench tops to prevent acid burns from acid based products such as lemons, limes, tomato sauces, coke and champagne.

For More Questions

FAQs » »

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software