1300 771 201

Availability for emergency

1. Home »
2. faqs

Frequently Asked Questions

Other FAQs :

• Q: How do I remove leaf and pet dropping stains from my sealed outdoor paving?
• A: Apply bleach or pool chlorine to the sealed surface. Allow 30minutes to react with the stain then hose off.
• Q: Who do you carry out the work for?
• A: Our customers include both private and commercial customers. Hotel groups and Leisure facilities make up a large amount of our work but we have cleaned stadiums, public toilets and miles and miles of tiles in private houses. These can be man made porcelain and ceramic or natural stone.
• Q: How does it achieve such a clean finish?
• A: The combination of emulsification, heat, pressure and vacuum surgically removes the build up of dirt, grease and grime from the micro pores of the different surfaces. First the emulsifier disloves these contaminants and then the heat and pressure combine with the vacuum to remove them.
• Q: If we have a spillage on our newly sealed floor what should we do?
• A: Immediately wipe up spillage with warm soapy water before it dries.
• Q: How often does my sealed surface need re application?
• A: All situations are different based on use and cleaning regime employed, but as a rough guide; surface sealers should be reapplied every 3-6months in a high traffic commercial situation and approximately every 12months in an average domestic situation. Penetrating Sealers, depending on the initial application and cleaning regime 3-15years.

For More Questions

FAQs » »

To schedule your appointment or to obtain a free estimate, please Call 1300 771 201 or use the online enquiry form at the top of the page.

Field Service Management Software